Chapter 305: Master of Foundry

In front of the workbench, Chen Xin is designing his own universal tool.

Although the inspiration for this thing comes from the universal tool in the

"Mass Effect" game, the thing in the game that only requires a chip to be

implanted and can achieve all the functions is still not possible, or not

enough. Survival points and supplies to upgrade it.

So Chen Xin intends to build a robotic arm that integrates all common tools,

which is equivalent to carrying a toolbox with him.

And after installing a microcomputer and a scanning analysis instrument, the

robotic arm can analyze the situation by itself and change the appropriate

tools, eliminating the need for users to change different types of wrenches

and screwdrivers to screw screws.

People who don't work in the factory may never understand how annoying it is

to not have the right wrench or screwdriver during on-site construction.

Sometimes it may be because a wrench can’t be found, work has to be delayed

for hours or even days to borrow or buy, and this often causes a lot of time

delays. For the factory, the losses caused by equipment downtime for a day are

all Hundreds of thousands or even millions.

So if there is such a robotic arm, it is indeed a very good choice, even if it

will be heavy and worthwhile.

Chen Xin conceived this robotic arm in his mind, and at the same time was

putting together what he needed.

There is no off-the-shelf microcomputer, but Chen Xin found an old mobile

phone as a replacement. Now the mobile phone is useless, and it is just right

to replace it.

As for the analysis and detection instruments, Chen Xin got a lot of things

such as cameras, temperature guns, rangefinders, speedometers, tachometers,

etc. Although they were piled up a lot, after integration, there would be no

problem. .

As for the tools, it is the easiest. Just take a toolbox to meet various

needs.

In addition to these, Chen Xin also wants to add a 3D printer to it.

This stems from the advice of Chen Xin’s father. Those who have been involved

in on-site construction all year round know that sometimes parts need to be

processed on site, such as welding a bracket, connecting an elbow, or even

temporarily processing a part...

Because on-site construction often encounters various situations, it is so

common that the equipment cannot be installed and the parts do not match. Chen

Xin's father can't remember it during his decades of working life. How many

parts have been temporarily processed on site?

So seeing that Chen Xin wanted to integrate a universal tool, as a father, he

still gave his son some experience from the elderly.

Regarding the suggestions made by his father, Chen Xin naturally followed his

goodness, cutting, welding, sheet metal, boring and milling...These functions

are all necessary, but instead of processing parts with materials on site,

Chen Xin prefers 3D printing to print directly. A suitable part comes.

It's just that he doesn't have a 3D printer yet. This function can only be

temporarily put aside for a while. After he has made the robotic arm, he will

see if there are alternative solutions during the second upgrade.

And not only the 3D printing is not installed, but also the functions of argon

arc welding, electric welding, sheet metal, boring and milling are not

integrated due to the lack of equipment, and can only wait for the second

upgrade.

But this is not a big problem for Chen Xin, it's just a matter of spending a

bit more to survive the second upgrade.

What's more, even with these shortcomings, he has to do this robotic arm.

After gathering things together, Chen Xin found an angle steel, and after

cutting it on the workbench, he began to pile various tools and instruments on

it.

This seems quite a feeling that the green-skinned master is thinking about a

new big bang. The sparks splashed by the metal cutting are completely out of

order. They are just randomly piled up tools, and even some instruments simply

use them. The tape is wrapped...

The final assembled product not only has a strong wasteland punk style, but

also has a very green-skinned maneuverability. It is rough, heavy, and not

even practical. It is exactly what I think is so good, so it is just like

that. I did, without talking about any reason or design specifications.

Of course, what Chen Xin ended up using was certainly not such a green-skinned

thing. In fact, he couldn't use the thing that was finally assembled, because

there were so many tools installed that it took too much effort to pick it up.

Not to mention use.

So an upgrade is still needed.

After a green light flashed, the original green-skinned device turned into a

robotic arm in the style of a mechanical god. Although thick and complicated,

it became a lot more tidy. There were no extra threads and tape, and it was

originally bare. The angle steel has also become a silver-white support shaft,

wrapped in a metal shell, becoming a real mechanical arm.

The complicated and complicated tools and instruments on the robotic arm are

now well integrated and integrated into the robotic arm. Some replaceable

parts and components are also neatly stored and can Easy replacement at any

time.

The entire robotic arm looks like a big backpack. Behind the back, there will

be a three-axis rotating robotic arm folded behind you, and next to it is a

display screen that can be stretched to the side of the head to operate and

display data.

Of course, the 3D printing, welding, sheet metal, cutting, boring and milling

processes that Chen Xin needed before are also integrated into the robotic

arm. Now this robotic arm is capable of meeting all on-site construction

needs, even Chen Xin has A detachable drill bit is added to it, which can even

be used to mix cement with a mixer.

But although the function is perfect, UU reading www. After the integration

and upgrade of uukanshu.com, the robotic arm has become lighter and more

convenient to use, but after Chen Xin tried it, he found that it still cannot

be easily used by one person.

At least Chen Xin couldn't easily pick it up without wearing power armor or

exoskeleton.

This made Chen Xin scratch his head a bit. The tools were made and he couldn't

pick it up. This was really ironic. Could it be that he had to go to work out

and become a weightlifter before coming back?

Or is it directly integrated into the power armor, so that you can simply play

a cameo as a foundry master of the mechanical gods?

Chen Xin scratched his eyebrows, thinking that this idea was quite good.

And there is a saying, he feels that he is indeed like a master casting master

now.

Just do it, Chen Xin opened his power armor, and asked Qin Lan to wear her

power armor to help install the entire robotic arm on the back of his own

power armor.

Then...just need to upgrade again, a set of power armor with robotic arms

appears.